(2) MTX 5510-44 10" 1600w DVC 4-ohm Car Audio Subwoofers+MTX Amplifier+Amp Kit

$98.99 ~~$454.95~~

Qty. :

Category : Pro Audio & Lighting

Description
Warranty Information

Package Includes:

(2) MTX 5510-44 10" 800 Watt Peak/400 Watt RMS DVC 4-ohm Car Audio Subwoofer Sub
(1) MTX THUNDER1000.1 1000 Watt RMS Mono Class D 1-Ohm Amplifier Car Audio Amp
(1) Rockville RWK4CU 4 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC

Authorized MTX Audio Dealer!

Description:

High SPL Subwoofers55 Series Subwoofers are high SPL subwoofers that deliver the most bass for your buck. Implementing many of the same features found on our 75 & 95 Series SuperWoofers, the 55 Series can rock hard and loud for extended periods of time, while maintaining accurate and clean bass throughout the party. You will be impressed.

The 5510-44The 5510-44 is a 10? dual voice coil, 400 watt, 4 ohm subwoofer built on the MTX tradition of getting more than expected. The 55 Series subs are often used in applications where bass levels are the most important factor. These subwoofers are designed to move air and go boom! They are true monsters of bass and are a great choice for anyone that really wants to be heard.

55 Series Spider Plateau VentingThis subwoofer also incorporates Spider Plateau Venting which is a mechanical cooling process that targets cool air at the voice coil and a radial ribbed t-yoke that acts as a heat sink effectively managing the subwoofer temperature for long term rocking performance.

The MTX Inverted Apex SurroundThis subwoofer features the MTX Inverted Apex Surround. This is a departure from a traditional half roll surround. The Inverted Apex is narrower thereby increasing the surface diameter of the subwoofer cone enabling it to displace more air and generate higher SPL. The 55's are designed with a progressive suspension that lowers distortion resulting in improved sound quality even at high volume.

Features:

MTX 5510-44 10" 800 Watt Peak/400 Watt RMS 4-Ohm Car Subwoofer
RMS Power Handling: 400 Watts
Peak Power Handling: 800 Watts
Recommended Amp Power: 200-400 Watts RMS
Impedance: Dual 4 Ohms
Frequency Response: 28Hz - 130Hz
Sensitivity: 83.5 dB
Voice Coil: 2" inches (Dual)
Magnet Weight: 56 oz.
Mounting Depth: 5.625" inches
Cut Out Diameter: 9.188"
Volume Displacement: 35.0 cu in
Sealed Enclosure Net Volume: 0.75 cu ft.
Vented Enclosure Net Volume: 2.0 cu ft.
Inverted Apex Surround: Increases Surface Area Resulting in Increased Volume Displacement and SPL
Spider Plateau Venting: Targets Cool Air at Voice Coil for Improved Thermal Performance
Progressive Suspension: Controls Excursion at High Power Reducing Distortion Resulting in Better Sound Quality
Radial Ribbed T-Yoke: Helps Dissipates Heat and Decreases Distortion Improving Sound Quality

How To Set the Gain on Your Car Subwoofer Amplifier:

Authorized MTX Dealer!

Description:

Feel the ThunderMTX THUNDER1000.1 is designed to work with an assortment of subwoofers and is capable of delivering up to 2000 watts peak power (1000 watts RMS) in an incredibly small package.This wailin' amp features a high efficiency class D topology. This type of circuit is preferred for driving subwoofers due to its ability to minimize power loss to heat when you rock all night long.

High Power High ValueThe THUNDER1000.1 is a high powered subwoofer amplifier capable of delivering up to 1000 watts RMS power at 1O. Additionally, the unit is designed to be installed in almost any vehicle due to its small chassis size.

Technologically AdvancedThe THUNDER1000.1 features surface mount technology. This design uses smaller more efficient parts that adhere to the circuit board much better than traditional through hole designs making it extremely vibration resistant.

Easy AdjustmentThe control panel on the THUNDER1000.1 is easy to access and make adjustments. The unit includes a variable low pass filter and a selectable bass boost, 0, +6, or +12dB. The unit also features a subsonic filter that can be used in conjunction with a vented enclosure for optimal sound quality.

Secure ConnectionsThe THUNDER1000.1 uses set screw type connections for both its power and speaker terminals. The power and ground inputs will support up to a 1/0 AWG wire and the speaker inputs can support up to a 12 AWG wire. Set screw type connectors provide the most secure connection minimizing power loss and delivering all the power to the amplifier and to the speakers.

Features:

MTX THUNDER1000.1 1000 Watt RMS Mono Class D 1-Ohm Amplifier Car Audio Amp
Small Footprint
Extruded Aluminum Heat Sink
Selectable Bass Boost: 0, 6, or 12dB
Surface Mount PCB Design
Variable Butterworth Crossover 12dB/Oct
Variable Subsonic Filter
Thermal, DC Offset, and Short Circuit Protection Circuitry
Description: Mono Block
4 Ohm RMS Power Output: 350W x 1 Channel
Signal to Noise Ratio: 80dB
2 Ohm RMS Power Output: 600W x 1 Channel
1 Ohm RMS Power Output: 1000W x 1 Channel
Topology: Class D
THD: <1%
Frequency Response: 10Hz - 220Hz
Low Pass Filter: Variable Low @ 40Hz to 220Hz, 12dB/Oct
Subsonic Filter: 10Hz to 50Hz, 12dB/Oct Variable
Bass Boost: 0, 6, 12dB Switchable
Max Sensitivity: 200mV
Maximum Input Signal: 5V
Height: 6.3"
Width: 12.13"
Depth: 2.25"

Advantages of buying from an authorized seller:

Best prices - We sell all MTX Products at great prices
Full Factory Warranty
Guaranteed legitimate and authentic merchandise

Please note: If you purchase MTX from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.

All About Your RWK CU Series:

Description:

We challenge anyone to put this wire to a resistance test against any other wire on the market with the same gauge. If our cable does not meet or exceed any other cable, even if it costs 3 times more, we will be happy to call tag the item and refund you in full. Why are we so confident ? This cable is 100% copper. You cant have a cable with more than 100 % copper. So the only way a cable would out-perform this one is if it were being advertised as a 4 AWG but they are giving you more wire than advertised. No brands selling 100 % copper cables actually do this.

We guarantee that this kit will compete with the most expensive amp kits on the market from Kicker, JL Audio, or any other top brands.

Maximum Power!

Looking for a wire kit that has 100% true specifications! A wire kit that uses 100% copper 4-gauge cable! Then look no further than the Rockville True-Spec RWK4-CU 4 Gauge Amplifier Wiring Installation Kit. This package includes everything you'll need to get your amplifier system powered-up correctly and at peak efficiency. All items included in this kit are top of the line.

The power and ground cables aptly named "Mega Power Cable" is a no compromise power cable. Rockville's engineering team over-built and designed the cables using thousands of strands of only true 100% oxygen-free, silver-tinned copper strands. The use of a proprietary special twisting process reduces "surface skin impedance loss" so that Mega Power cables have zero signal and power loss, delivering full power from your battery system to your amplifier even at lengths of 20 feet! The increased current flow and higher amperage carrying capacity will increase your amplifiers efficiency and keep your amplifier running cooler. The SuperFlex outer insulating jacket jacket makes installation and cable routing simple and easy. The 100% copper stranded wire is extremely tolerant of the hostile conditions found under the hood in vehicles and compensates for vibration, heat expansion and flexibility. This flexible and well-shielded wire is crucial for getting through all of the nooks and passageways within the confines of a vehicle interior.

Some manufactures use all aluminum or mix a little copper with aluminum to give their cables the appearance of a "heavy-duty" cable. But not Rockville, our True-Spec 100% oxygen free, silver tinned copper eliminates corrosion, increases current transfer x 10, and won't discolor over time.

The superior quality and materials of the Rockville 100% True-Spec amplifier installation kit is realized in the included accessories and cable workmanship. Included is a precision CNC cut full size ANL fuse housing, machined from solid brass and then 14K gold plated for superior signal transfer and complete with a matching gold plated 120-amp ANL fuse. The power cable is wrapped in 6 feet of durable nylon braided tubing to protect it from heat and chafing in the engine compartment. All installation accessories such as the ring terminals and spade connectors are nickel plated for superior signal transfer and durability.

CRYSTAL SQ AUDIO PLANAR SPEAKER CABLE

The speaker cable included in the Rockville True-Spec is also manufactured from 100% copper and woven in to a flat planner design and coated in our Super-Flex insulation so that it fits under and around your vehicles trim and carpet smoothly and without bulking up. With crystal clear sound quality these speaker cables deliver true audio fidelity from your car audio amplifier to your speakers. The 14-gauge speaker cable included in the 4-gauge kit can handle over 2000 watts of power without heating up or degrading signal quality.

CRYSTAL SQ RCA AUDIO INTERCONNECT CABLE

Designed and engineered to be the best sounding, best performing and best looking RCA cables available today. Each channel in the RCA cable is triple shielded first with dielectric internal insulators and then with a 98% coverage woven shield. All cables are manufactured of 100% oxygen free copper and feature twisted pair technology for superior noise rejection and pure sonic signal flow. The RCA plugs are shielded metal and feature a spiral cut outer ground ring with center split pin for precise and tight audio connections. The result of all this technology is noise free-noise rejection signal transfer for optimum sound quality. You will hear the difference these RCA signal transfer cables will make.

Amplifier Kit Key Features:

Rockville RWK4CU 4 Gauge 2 Channel Complete Car Amplifier Installation Kit 100% Pure Copper RCA Cables
4 Gauge Power Amplifier Installation Kit
Designed specifically for car audio systems over 1000 watts RMS to 2000 Watts
Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
The solid brass gold plated Mini ANL Fuse Holder offers ideal protection for high powered systems
Strand Count: 1862
BC-5W2 Compliant

Kit includes: